Commercial RO Membrane Element

Basic Info

Model NO.	3012-400
Filter Connector	1812-75
Filtration Grade	ULPA Filter
Activated Carbon Filter Type	Bulk Type
Gpd	1150ml/Min
Rejection	97.00%
Test Temperature	25ºC±0.5
Test pH	7.5-8.0
Test Solution	500ppm
Test Pressure	80psi(0.55MPa)
Recovery	35%
Certificate	ISO9001, ISO14001
Transport Package	Carton/Pallet
Specification	50 pc/carton
Trademark	Wecome
Origin	China
HS Code	8421999090
Production Capacity	100000 PCS Per Month

Product Description

3012-400 1150ml/min 97% rejection domestic Spiral-Wound elementsProduct DescriptionThe stated product performance is based on data taken after 30 minutes of operation.Test Conditions as follows:200 mg/L NaCl solution80psi (0.55 MPa) applied pressure;35% recovery;77ºF (25ºC);pH 6.5-7.0;Permeate flow rate for each element may vary +20 / -20%;Stable rejection is 97.00%;All elements are vacuum leak tested.Elements can be supplied as dry.All elements are individually boxed.Packaging & Shipping

Model Name	Sheet Type	Permeate Flow Rate(GPD)	Applied Pressure Psi(Mpa)	Stabilized Salt Rejection(%)	Recovery	Sheet Effiency area	Remark
2812-200	TPK	600ml/min	80psi(0.55Mpa)	97.00%	35.00%	1.375	Dry type elements
3012-300	TPK	850ml/min	80psi(0.55Mpa)	97.00%	35.00%	1.65	Dry type elements
3012-400	TPK	1150ml/min	80psi(0.55Mpa)	97.00%	35.00%	1.925	Dry type elements
3013-300	TPK	900ml/min	80psi(0.55Mpa)	97.00%	35.00%	1.575	Dry type elements
3013-400	TPK	1150ml/min	80psi(0.55Mpa)	97.00%	35.00%	1.89	Dry type elements
3013-600	TPK	1350ml/min	80psi(0.55Mpa)	97.00%	35.00%	2.2	Dry type elements
3013-600L	Usual	1500ml/min	80psi(0.55Mpa)	96.00%	35.00%	2.2	Dry type elements
3213-600	TPK	1700ml/min	80psi(0.55Mpa)	97.00%	35.00%	2.835	Dry type elements
3213-800	Usual	2000ml/min	80psi(0.55Mpa)	96.00%	35.00%	2.835	Dry type elements

GENERAL HANDLING PROCEDURES:
Elements contained in the boxes must be kept dry at room temperature (7-32°C; 40-95°F) and should not be stored in direct sunlight.Permeate from the first hour of operation should be discarded.Stabilized salt rejection is generally achieved within 1~48 hours of continuous use.Keep elements moist at all times after initial wetting.Avoid excessive pressure and flow spikes.Only use chemicals compatible with the membrane elements and components. Use of such chemicals may void the element-limited warranty.
Permeate pressure must always be equal or less than the feed/concentrate pressure. Damage caused by permeating back pressure voids the element limited warranty.
Company Profile
Shanghai WECOME Environmental & Technology is a professional membrane technology and materials supplier with production and sales together. We are specializing in water membrane automatic production machines and attached membrane materials supply, we have our own tape production line and mold manufacturing center, so we can supply you with u specialized color, SPEC and LOGO mark tape products or membrane central tube products.

CertificationsFAQ

1 Who we are?
We are specializing in RO membrane solutions, including rolling machines and raw materials, like central tube, spacer, tricot(permeate carrier), sheet, glue etc. We also have our own factory, which is based in 2011.

2 Do your products support customization? Can I put my logo on the product?
Yes, sure. We support customized logo in the product including packing.

3 How long does the delivery 40HQ container usually take?
One 40HQ container we can delivery about 15-20 days after receiving full payment.

4 Can I get a free sample? And how long does the delivery sample usually like?
Yes, sure. We can provide you free sample, you just responsible for shipping cost. We can prepare 3-5 days for sample production.

5 Where are your company? Can I visit your company?
Yes, sure. We are located in Shanghai, China. We also have branch located in Beijing, Shenzhen and India.

6 Why choose Wecome?
Not only we are a material supplier, we are also your reliable technical adviser. We have long time experience in membrane rolling market and have many years experiences of imports and exports.